Shift Cable Replacement
2.
1 .
4 .
Raise the vehicle, and make sure it is securely
supported.
Remove the center console (see page 20-58)
Shift the transmission into the N position.
Remove the nut securing the shift cable end, then
separate the cable end from the shift lever.
5. Rotate the socket holder (A) on the shift cable (B) a
quarter turn; the tab (C) on the socket holder will be
in the opening ofthe shift lever btacket base {D).
Then slide the holder to remove the shifl cable
from the shift lever bracket base (D).
Remove the heat shield.
Remove the shift cable bracket (A) and grommet (B)
6 x 1 . 0 m m
9.8 N.m (1.0 kgf.m,7 2lbf ft)
(cont'd)
1 4 - 1 6 1