Acura 2002 RSX Service Manual page 726

Hide thumbs Also See for 2002 RSX:

Table of Contents

Transmission Housing

Bearing Removal

Special Tools Required

. Attachment, 78 x 90 mm 07GAD-SD40101

. Driver 07749-0010000

. Attachment.42 x 47 mm 07746-0010300

1. Remove the idler gear shaft when removing the

mainshaft bearing and idler gear shaft bearing.

NOTE; lf you are only removing the countershaft

bearing, idler gear shaft removal is not needed.

2. To remove the mainshaft bearing (A) and

countershaft bearing {B) from the transmission

housing, expand each snap ring with the snap ring

pliers, then push the bearing out.

NOTE: Do not remove the snap ring unless it,s

necessary to clean the grooves in the housing.

3. Expand the snap ring ofthe idler gear shaft bearing

with the snap ring pliers, then push the bearing out.

Chapters

Table of Contents