Acura 2002 RSX Service Manual page 695

' 1 .
3 .
Shift Cable Adiustment
4 .
Remove the center console {see page 20-58).
Shift the transmission into N position.
Remove the nut securing the shift cable end, then
separate the cable end from the shift lever'
Rotate the socket holder (A) on the shift cable (B) a
quaner turn; the tab (C) on the socket holder will be
in the opening of the shift lever bracket base (D).
Then slide rhe holder to remove the shift cable
from the shift lever bracket base {D). Do not remove
the shift cable by twisting the shift cable guide (E).
5. Push the shift cable (A) until itstops,then release it.
Pull the shift cable back two steps so that the shift
Dosition is in E. Do not push and pullthe shift
cable by holding the shift cable guide (B)
) + E f f
6. Turn the ignition switch ON (ll), and verify that the
E position indicator comes on.
7. Turn the ignition switch OFF.
8 . l n s e r t a 6 . 0 m m ( 0 . 2 4 i n . ) p i n { A ) t h r o u g h t h e
positioning hole (B) on the shift lever bracket base
and into the positioning hole (C) on the shift lever'
The shift lever is secured in the B position
(cont'd)
14 -1 63