45. Remove the front mount bracket mounting bolt'
Use a marker to make alignment marks on the
reference lines {A) that align with the centers of the
rear subframe mounting bolts (B).
47. Remove the front sublrame (C)
-.--;=:=-
48. Oisconnect the compressor clutch connector (A),
then remove the Ay'C compressor (B) without
disconnecting the Ay'C hoses
@-^
49. Check that the engine/transmission is completely
free of vacuum hoses, fuel and coolant hoses, and
electrical wiring.
50. Slowly lower the engine about 150 mm
(6 in )'
Check once again that all hoses and wlres are
disconnected from the engine/transmission'
51, Lower the engine all the way' Remove the chain
hoist from the engine.
52. Remove the engine from under the vehicle
5-9