Acura 2002 RSX Service Manual page 870

Hide thumbs Also See for 2002 RSX:

Table of Contents

96. lnstall a new lock washer (A) on the tie-rod (B) with

the radiused side of the w?sher toward the tie-rod,

and screw the tie-rod on the bracket (C) Repeatthis

step for the other tie-rod. Hold the bracket with one

wrench, and tighten both tie-rods to the specified

toroue with another wrench.

97. Bend the lock washer against the flat spots on the

bracket with a large pair of pliers

I n s t a l l t h e c y l i n d e r l i n e s .

Note these items during reassembly:

. Thoroughly clean the joints of the cylinder lines.

The joints must be free of foreign material

. I n s t a l l t h e c y l i n d e r l i n e s b y t i g h t e n i n g t h e f l a r e

nuts by hand first, then tighten them to the

specified torque.

K20A3 Engine models:

12.8 kgt.m,20 lbf.ft)

K20A2 Engine models:

{1.7 kgf.m,12lbf.ft)

99. Adjust the rack guide screw {see page 17'30). After

adjusting, check that the rack moves smoothly by

sliding it right and left.

Chapters

Table of Contents