Acura 2002 RSX Service Manual page 766

Shafts and Clutches
Clutch Clearance Inspection (cont'd)
6. Installthe waved spring (Al in the 4th clutch drum
(B). Staning with the clutch waved-plate.
alternately install the clutch plate (3) (C) and discs
(3) (D). then install the clutch end plate (E) with the
flat side toward the disc.
'-t-'@'
7 . Inslall the waved spring (A) in the sth clutch drum
(B). Starting with the clutch waved-plate,
alternately installthe clutch plate (3) (C) and discs
(3) (D), then installthe clutch end plate (E)with the
flat side toward the disc.
14-234
8 . I n s t a l l t h e s n a p r i n g w i t h a s c r e w d r r v e r .
9. Set a dial indicator {A} on the clutch end Dlate (B).
Zero the dial indicator with the clutch end plate
lifted up to the snap ring (C).
Release the clutch end plate to lower the clutch end
plate. then put the special tool on the end plate (A).
1 0 .
' l
1 .
150-160 N
{15-16 kgf.
33-35 tbtl
07zAE-PRP0100