Acura 2002 RSX Service Manual page 702

A/T Gear Position Indicator
Transmission Range Switch Replacement
1 . Raise the vehicle, and make sure it is securely
supported.
Shift to E position.
3. Remove the transmission range switch cover,
L-
Disconnect the transmission range switch
connector.
5. Remove the old transmission range switch, and
i n s t a l l t h e n e w s w i t c h .
14-170
i; P
6. Make sure thatthe control shaft is in E position. lf
necessary, move the shift lever to [E position.
Align the cutout (A) on the rotary-frame with the
neutral positioning cutouts (B) on the transmission
range switch (C), then put a 2.0 mm (0.08 in.) feeler
gauge blade (D) in the cutouts to hold it in the m
oosition.
NOTE: Be sure to use a 2.0 mm (0.08 in.) blade or
equivalent to hold the switch in the B position.
7 .