Fuel Fill Door Opener Replacement
NOTE: Put on gloves to protect your hands.
1. Slide the driver's front seat rearward fully.
2. Remove these items from the left side of the
vehicle (see page 20-49):
. Door sill trim
. Kick panel
3. Pull the carpet back as necessary {see page 20-56).
4. Remove the bolts. then remove the fuel fill door
opener (A) irom the body.
Fastener Locstions
> : Bolt, 2
mrD
6 x 1 . 0 m m
9.8 N.m
{1.0 kgf.m,7.2lbf ftl
Disconnect the fuel fill door opener cable (B) from
the opener. then remove the opener. Take care not
to bend the cable.
6. Installthe opener in the reverse order of removal,
and note these items:
. Make sure the opener cable is connected
properly.
. Make sure the fuellill dooropens properly and
locks securelv.
20-111