Acura 2002 RSX Service Manual page 138

1 9 .
20.
lnstallthe VTC oil control solenoid valve (see step 1
o n p a g e 1 1 - 1 3 5 ) .
Connect the CKP sensor connector {A) and VTC oil
control solenoid valve connector (B)
lnstall the oil cooler hose ioint (A), using a new O-
r i n g ( B ) ( K 2 0 A 2 e n g i n e ) .
2 1 .
6 x 1 . 0 m m
12 N.m (1,2 kgt.m,8.7 lbt.ftl
22. Clean the crankshaft pulley (A) and pulley bolt {B)'
and apply lubricant to the pulley bolt and washer
(c).
O : C l e a n
O: Lubricate
24.
t n s t a l l t h e c r a n k s h a f t p u l l e v , a n d h o l d t h e p u l l e y
with holder handle (A) and holder attachment {B)
07NAB-001040A
{cont'd)
Tighten the bolt to 245 N.m (25.0 kgf.m, 181 lbf ft)
with a torque wrench and 19 mm socket (C). Do not
use an impact wrench.
lnstallthe cylinder head cover (see page 6-46).
lnstall the drive belt.
25.
26.
(@,
'
:
'.'/
a v a i l a b l e )
6'21