Front Fender Fairing Replacement - Acura 2002 RSX Service Manual

1 .
Front Fender Fairing Replacement
Remove the front inner fender as necessarv (see
page 20-102).
Open the front door. From inside the door, remove
the upper and lower clips (A) securing the front
fender fairing (B) and front fender {C).
Fastengr Locations
A > : C l i p , 2
J44- '
t * g
l
,,,r.-__-.a.__
f:-,'r,/. ir i'
--
-..
K,+,
A , r
From the wheel arch. remove the clip (A), and
release the clip (B), then remove the front fender
f a i r i n g ( C ) .
Faslonor Locations
A > : C l i p , l
B > : C l i p , 1
+y-'@
4. Install the fender fairing in the reverse order of
removal, and note these items:
. Replace any damaged clips.
. On the left side of the vehicle, route the rear
window washer tube (A) through the slit (B) in
the front fender fairing (C).
. Before installing the clips in the doorjamb area,
install the front fender fairing (C) on the front
fender (D) properly as shown.
. Push the clips into place securely.
Upper portion:
Lower portion:
I
\ \
o-
ohtx
k\ \r
|
\
\*-"
20-103