Acura 2002 RSX Service Manual page 709

Hide thumbs Also See for 2002 RSX:

Table of Contents

21. Disconnect shift lock solenoid connector.

22. Turn the ignition switch ON (ll).

23. Measure the voltage between shift lock solenoid

connector lerminals.

SHIFT LOCK SOLENOID CONNECTOR

Wire side ol {emale terminals

ls there batterY voltage?

YES Go to step 24.

NO - Check for blown No. I fuse in the under-dash

fuse/relay box. lf the luse is OK, repair open or

short in the wire between the shift lock solenoid

connector and the under-dash fuse/relay box l

24. Connect the battery positive terminal to shift lock

solenoid connector terminal No. 1, and connectthe

b a t t e r y n e g a t i v e t e r m i n a l t o t e r m i n a l N o 2 , t h e n

check that the shift lock solenoid operates'

NOTE: Do not connect the battery positive terminal

to terminal No. 2 or You will damage the diode

i n s i d e t h e s h i f t l o c k s o l e n o i d .

SHIFT LOCK SOLENOID CONNECTOR

Terminal side of male terminals

Does the shitt lock solenoid operate properly?

YES Check for an open in the wire between the

shift lock solenoid connector and the multiplex

control unit. It the wire is OK. check for a loose

terminal fit in the multiplex control unit connectors

lf necessary, substitute a known-good multiplex

control unit and recheck.l

N O - R e p l a c e t h e s h i f t l o c k s o l e n o i d . l

Chapters

Table of Contents