Acura 2002 RSX Service Manual page 666

Automatic Transmission
2nd Clutch Transmission Fluid
Pressure Switch Replacement
'L
Remove the air cleaner housing.
2. Disconnect the connector from the 2nd clutch
transmission fluid pressure switch (A).
Remove the 2nd clutch transmission fluid pressure
switch, then install a new one with a new sealing
washer (B). Tighten the switch to the specified
IOrque.
Reconnect the connector, making sure there is no
water, oil. dusl, or foreign particles inside it.
Install the air cleaner housing.
1 4-1 3 4
3rd Clutch Transmission Fluid
Pressure Switch Replacement
1. Disconnect the connector from the 3rd clutch
transmission fluid pressure switch (A).
(2.0 kst.m. 14lbt.ft)
2. Remove the 3rd clutch transmission fluid pressure
switch, then install a new one with a new sealing
washer (B). Tighten the switch to the specified
torq ue.
3. Reconnect the connector, making su.e there is no
water, oil, dust, or foreign particles inside it.
A