Acura 2002 RSX Service Manual page 755

Secondary Shaft 1st Gear Clearance lnspection
Special Tool Required
Attachment, 42 mm l.D. 07OAD-P0A0100
1. Installthe thrust needle bearing (A), needle bearing
(B), 'lst gear (C), thrust needle bearing (D), 40 x 51.5
mm thrust washer {E), 1sv3rd clutch (F). and 3rd
gear collar (G) on the secondary shaft (H).
24 x 1.25 mm
29 N.m
(3.0 kgf.m.22 lbf.ft)
g
-{fr)'
v
\ *
Install the idler gear (l), then install the ball bearing
(J) on the idler gear with the special tool and a
oress.
I n s t a l l t h e c o n i c a l s p r i n g w a s h e r { K ) a n d l o c k n u t ( L ) ,
then tighten the locknut to 29 N.m (3.0 kgf.m,
22 tbf.trl.
Turn the secondary shaft assembly upside down.
and set the dial indicator (A) on the l st gear (B).
(cont'd)
14-223