Acura 2002 RSX Service Manual page 694

Automatic Transmission
Shift Cable Replacement (cont'd)
Remove the bolts securing the shift cable holder (A).
then remove the shift cable cover (B).
1 1 .
R e m o v e t h e s p r i n g c l i p ( C ) a n d c o n t r o l p i n ( D ) , t h e n
separate the shift cable (E) from the control lever
{ F ) .
Insen the new shift cable through the grommet
hole. Do not bend the shift cable excessively.
Install the shift cable bracket on the body. then
i n s t a l l t h e g r o m m e t .
Verify that the transmission is in the E position on
the control lever.
Attach the shift cable end to the control lever, then
insert the control pin into the control lever through
the shift cable end, and secure the control pin with
t h e s p r i n g c l i p .
Install the shift cable cover, then secure the shift
cable holder to the shift cable cover with the bolts.
NOTE: To prevent damage to the control lever joint,
remove the bolts securing the shift cable holder
before removing the bolts securing the shift cable
cover.
I n s t a l l r h e h e a t s h i e l d .
9 .
1 0 .
t l .
1 4 .
6 x 1 . 0 m m
9 , 8 N m ( 1 . 0 k g f . m ,
7.2 rbf.ftl
14-162
16. Turn the ignition switch ON (ll); and verifv that the
E position indicator comes on.
1 7 . Install the shift cable to the shift lever (see step 5 on
page 14-163). lf necessary, adjust the shift cable.