Clutch Inspection
1. lnsDect the 4th and sth clutch pistons and clutch
oiston check valves.
2 .
lf the clutch piston check valve is loose or damaged,
replace the clutch piston.
Check the spring retainer for wear and damage.
Check the oil seal on the spring retainer of the 1st,
2nd. and 3rd clutches for wear, damage, and
peeling.
lf the oil seal is worn. damaged, or peeling, replace
the spring retainer.
7',_--:t---- -=--_----:
t /
\ ' ,
..
---
..
\
l - - - - - - - - - \ \ \ r
6. Inspect the clutch discs, clutch-plates, and clutch
end plate for wear, damage, and discoloration.
Standard Thickness
Clutch Discs:
1.94 mm {0.076 in.}
Clutch Plates:
2.00 mm (0.079 in.)
lf the clutch discs are worn or damaged, replace
them as a set. lf the clutch discs are replaced,
inspectthe clutch end plate-to-top disc clearance.
7 .
8. lf any plate is worn, damaged, or discolored,
replace the damaged plate with the new plate, and
inspect the other waved-plates for a phase
difference. lf the clutch plate is replaced, inspect
the clutch end plate-to-top disc clearance.
9. lf the clutch end plate is worn, damaged, or
discolored, inspect the clutch end plate-to-top disc
clearance. then replace the clutch end plate.
14-231