A/T Differential
I
{
.U
5 .
Carrier Bearing Preload Inspection (cont'd)
Install the differential assembly (A) in the torque
converter housing {B), and installthe gasket (C) and
dowel pins (D) on the housing.
Install the transmission housing (E) with the
t r a n s m i s s i o n
h a n g e r ( F ) a n d h a r n e s s c l a m p
brackets (G), then tighten the bolts.
14-260
fl
7 . Rotate the differential assembly in both directions
to seat the bearings.
Measure the starting torque of the differential
assembly with the special tool, a torque wrench 1A),
and socket (B). l\4easure the starting torque at
normal room temperature in both directions.