Driveshafts Disassembly - Acura 2002 RSX Service Manual

Driveshafts Disassembly
Special Tools Required
. T h r e a d e d a d a o t e r , 2 2 x 1 . 5 m m 0 7 X A C - 0 0 1 0 1 0 4
. Threaded adapter, 24 x 1.5 mm 07XAC-0010204
. B o o t b a n d p i n c e r s . c o m m e r c i a l l y a v a i l a b l e
. S l i d e h a m m e r , c o m m e r c i a l l v a v a i l a b l e
lnboard Joint Side:
'1.
Remove the set ring from the inboard joint.
Remove the boot bands. Be careful not to damage
the boot and dynamic damper.
. lf the boot band is a welded type (A), cut the bool
b a n d ( B ) .
. lf the boot band is a double loop type (C), lift up
the band bend {D), and push it into the clip {E)
. lf the boot band is a low profile type (F), pinch the
boot band using a commercially available boot
b a n d p i n c e r s ( G ) .
Welded Type
Double Loop Type
Low Profile Type
(cont'd)
16-5