Acura 2002 RSX Service Manual page 715

t .
Shift Lock Solenoid RePlacement
Remove the center console (see page 20-58)'
Disconnect shift lock solenoid connector (A). and
remove it from the shift lever bracket base {B).
Remove the shift lock solenoid with needle-nose
p l i e r s .
lnstall the new shift iock solenoid (C) by aligning
the joint of the shift lock solenoid plunger (D) with
the tip of the shift lock stop (E).
lnstall lhe shift lock solenoid connector on the shift
lever bracket base. then connect the connector'
l n s t a l l t h e s h i f t l e v e r c o n s o l e p a n e l
5 .
Park Pin Switch Test
1 . Remove the shift lever console panel
Disconnecttransmission gear selection switch/park
pin switch connector.
Shift to the E position, then check for continuity
between connector terminals No.
'l
and No 4'
There should be no continultY.
Shift out of the E position, and check for continuity
between terminals No.
'1
and No. 4. There should
be continuity,
5. lf the park pin switch is faulty, replace it'
4.
1 4- 1 83