24. Remove the exhaust pipe Ay'catalytic converter.
Remove the torque converter cover (A), and
remove the eight drive plate bolts (B) while rotating
the crankshaft pulley.
25.
2 7 .
28.
26. Remove the bolts securing the shift cable holder (A),
then remove the shift cable cover (B).
NOTE: To prevent damage to the control lever joint,
remove the bolts securing the shift cable holder
before removing the bolts securing the shift cable
cover.
Remove the spring clip (C) and control pin {D), then
seoarate the shift cable (E) from the control lever
(F). Do not bend the shift cable excessively.
Disconnect the ATF cooler hose (A) from the ATF
cooler line (B), then plug the end of the hose.
29. Remove the Jront mount bolt (C) and nut {D)
(cont'd)
14-143