Acura 2002 RSX Service Manual page 937

NOTE:
. The parking brake cablea must not be bent or
distorted. This will lead to stiff operation and
premature failure.
. Refer to the Exploded View as needed during this
procedure.
1. Release the parking brake lever fully.
2. Remove the console cover (see page 20-58)
3. Loosen the parking brake cable adjusting nut (A).
Remove the parking brake cable clip (A) from the
brake cable (B).
6 .
Disconnect the parking brake cable from the lever
(c).
Remove the parking brake cable mounting
hardware, then remove the cable.
7. lnstallthe new cable in reverse order of removal,
and note these items;
. Be careful not to bend or distort the cable.
. Make sure the parking brake cable clip is fully
seated on the cable housing.
. Do the parking brake cable adjustment (see page
1 9 - 7 ) .
1g-27