Front Suspension
Knuckle/Hub/Wheel Bearing Replacement (cont'dl
14. Separate the hub (A) from the knuckle (B) using the
special tool and a hydraulic press. Be careful not to
deform the splash guard. Hold onto the hub to keep
it from falling when pressed clear.
07GAF-SD,O100
/'/--''-"''
| ,1-'"
Press the wheel bearing inner race (A) off of the
hub (B) using the special tool, a commercially
available bearing separator (C), and a press.
1 5 .
07GAF-SD,10100
1 8 - 1 4
L
16. Remove the snap ring (A) and the splash guard (B)
from the knuckle (C).
\.
...''
Press the wheel bearing (A) out of the knuckle (B
using the special tool and a press.
1 7 .
+