Acura 2002 RSX Service Manual page 749

Reverse Selector Hub and 3rd Gear Removal
SpecialTool Required
Bearing separator 07KAF-PS30200
'02 model: MRMA Transmission Number
1021248 or later
'03 model
1 , I n s t a l l t h e s p e c i a l t o o l o n t h e 4 t h g e a r ( A ) S E T a
press on the countershaft (B) with putting a spacer
{C) between the press and countershaft, and
remove the reverse selector hub (B)
NOTE: Some reverse selector hubs are not press-
fitted, and can be removed without using the
sDecial lool and a Press
R e m o v e t h e n e e d l e b e a r i n g , s e t r i n g , 3 5 x 4 1 x i 8
mm collar, and cotters.
2.
Set the press on the countershaft (A) with putting a
spacer (B) between the press and countershaft, and
remove the 3rd gear (C).
4.
Remove the 37 x 41 x 57.8 mm coolar, sth gear, 1st
g e a r . a n d 2 n d g e a r .
14-217