19. Loosely installthe four subframe mounting bolts'
l8J,l:l,Til.. *nr-. ru., 'ornr
20. Align the reference marks (A) with the center oJ the
subframe mounting bolt heads (B), then tighten the
bolts to the sPecified torque.
21. Install the rear mount bracket bolts
10 x 1.25 mm
59 N m {6.0 ksf m. iA lbf ftl
22. Install the front mount bolt (A) and nut {B), connect
the ATF cooler hose (C) to the ATF cooler pipe'
A
12 x 1.25 firn
23. Remove the jack from the transmisslon
(cont'd)
64 N.m t6.5 kgf.m, it7 lbf ft)
14-151