Acura 2002 RSX Service Manual page 785

3 4 .
Instail the ATF cooler inlet line (A) with the new
sealing washers (B). and install the bracket {C} of
the ATF cooler inlet line on the shift solenoid valve
cover hole (D) (described in step 22 in Shaft
Assemblies and ATF Strainer Installation).
12 x 1.25mm
28 N.m {2.9 kgf.m,21 lbf ftl
6 x 1.0mm
1 2 N . m
(1.2 ksf.m, 8.7 lbt ft)
35. Installthe ATF cooler outlet line (E)with the new
s e a l i n g w a s h e r s ( F ) .
i f , -
36. Installthe breather tube (A)with facing the dot (B)
on the tube in a rearward position (differential side),
then install the other end (C) in the slot {D) of the
transmission hanger (E).
37. Install the ATF dipstick.
14-253