Conventional Brake Gomponents
Parking Brake Switch Test
1. Remove the console, and disconnect the connector
(A) from the switch (B).
Check for continuity between the positive terminal
and body ground:
. With the brake lever up, there should be
continuity.
. With the brake lever down. there should be no
continuity.
ot
EI
Y
1 9 - 1 0
Brake Fluid Level Switch Test
Check for continuity between the terminals (A) with the
float in the down position and the up position.
. Remove the brake fluid completely from the reservoir.
With the float down, there should be continuity.
. F i l l t h e r e s e r v o i r w i t h b r a k e f l u i d t o M A X ( u p p e r ) l e v e l
(B). With the float up, there should be no continuity.