Acura 2002 RSX Service Manual page 661

A/T Clutch Pressure Control Solenoid Valve A Test
1 . R e m o v e t h e a i r c l e a n e r h o u s i n g .
Disconnect the Aff clutch pressure control solenoid
valve A connector.
Measure Aff clutch pressure control solenoid valve
A resistance at the solenoid valve A connector.
STANDARD: 3 10 Q
lf the resistance is out of standard, replace the A'/T
clutch pressure control solenoid valve A.
Connect the battery positive terminal to the No. 1
terminal of the A/T clutch pressure control solenoid
valve A connector, and connecl the battery
n e g a t i v e t e r m i n a l t o t h e N o . 2 t e r m i n a l . A c l i c k i n g
s o u n d s h o u l d b e h e a r d .
6. lf no sound is heard, remove the A"/T clutch
pressure control solenoid valve A.
4 .
7 .
9 .
Check the fluid passage of the A/T clutch pressure
control solenoid valve for dust or dirt
Connect the No. 1 terminal of the A/T clutch
pressure control solenoid valve A connector to the
batterv Dositive terminal, and connect the No. 2
terminal to the battery negative terminal. lMake
sure the Mf clutch pressure control solenoid valve
moves.
Disconnect one of the battery terminals and check
for valve movement.
NOTE: You can see valve movement through the
fluid passage in the mounting surface ofthe A"/T
clutch pressure control solenoid valve A body.
l f t h e v a l v e b i n d s o r m o v e s s l u g g i s h l y , o r i f t h e
solenoid valve does not operate, replace the A,/T
clutch pressure control solenoid valve A.
1 0 .
14-129