Acura 2002 RSX Service Manual page 97

Cruise Control
Cruise Gontrol Actuator/Cable Replacement
1 . K20A3 engine: Remove the throttle cover (Al. fully
open the cruise control link by hand, then remove
the cruise control cable (B) from link. Loosen the
locknut (C), and remove the cable from the bracket.
K20A2 engine: Fully open the cruise control link by
hand, then remove the cruise control cable (A)from
link. Loosen the locknut (B), and remove the cable
from the bracket.
6 x 1 . 0 m m
1 2 N m
('1.2 kgt.m, 8.7 lbf.ft)
4-56
Remove the cowl cover (see page 20-98).
Disconnect the 4P connector, and remove the two
bolts securing the cruise control actuator.
6 x 1 . 0 m m
1 2 N . m
(1.2 kgf m.
8.7 rbf.ft)
Remove the actuator cover {A), then remove the
actuator cable (Bl from the cruise control actuator.
',,,
o