Acura 2002 RSX Service Manual page 130

Crankshaft Pulley Removal and Installation
Special Tools Required
. Holder handle 07JAB-001020A
. Holder attachment, 50 mm 07NAB-001040A
. Socket. 19 mm 07JAA-0010204 or a commercially-
available 19 mm socket
Removal
1. Remove front tires/wheels.
Remove the splash shield (see step 24 on page 5-51.
Hold the pulley with holder handle (A) and holder
attachment (B).
07NAB-0010,10A
Remove the bolt with a 19 mm socket (C) and
breaker bar.
4 .
lnstallation
1 . Clean the crankshaft pulley (A), crankshaft (B), bolt
(Cl, and washer (O). Lubricate as shown below.
ll
t l
::IL-+
! i ) _ o
! - /
a ' "
,
/s=lw
/
- ) ( -
/ l -
B '
---,^3C8...
Ell-I;llll"rinl
/-f-'
J \
D
O: Clean
O: Lubricate
A
Install the crankshaft pulley, and hold the pulley
with holder handle (A) and holder attachment {B).
B
07NAB-0010i10A
3. Tighten rhe bolt to 245 N.m {25.0 kgf.m, 181 lbf ft)
with a torque wrench and 19 mm socket (C). Do not
use an impact wrench.
4. Installthe splash shield (see step 21 on page 5-14).
5. Install front tires/wheels.
a v a i l a b l e )
6-13