Acura 2002 RSX Service Manual page 900

1. Raise the rear of the vehicle, and support it with
salety stands in the prop6r location (see page 1-8)'
2 . R e m o v e t h e w h e e l c a p , w h e e l n u t s , a n d r e a r w h e e l '
108 N m (11.0 kgf m,80 lbf ft)
Release the parking brake lever.
Remove the brake hose mounting bolt {A)
B
10 x 'l,25 mm
55 N.m
(5.6 kgf.m, 41 lbf ftl
8 x 1.25 mm
22 N.m
{2.2 kgf.m, 16lbf.ftl
4 .
Remove the caliper bracket mounting bolts (B), and
hang the caliper (C) to one side. To prevent damage
to the caliDer or brake hose, use a short piece of
wire to hang the caliper from the undercarrrage'
6. Remove the hub cap (A), raise the stake (B), and
remove the spindle nut (C)
7. Remove the brake disc retaining screws (A).
(r.0 kgf.m,7.2lbf.ft)
22 r 1,5 mm
18'1 N.m
(18.5 kgf m,
134 tbt.ft)
Screw two 8 x 1.25 mm bolts (B) into the disc (C) to
Dush it awav from the hub. Turn each bolt two turns
at a time to prevent cocking the disc excessively'
Remove the brake disc.
(cont'd)
6 x 1 . 0 m m
9.8 N.m
18-25