Acura 2002 RSX Service Manual page 1002

1 3 .
With a sponge, apply a light coat of body primer to
the original adhesive remaining around the quarter
glass opening flange. Let the body primer dry for at
least l0 minutes:
. Do not apply glass primer to the body, and be
careful not to mix up the glass and body primer
sponges.
. Never touch the primed surfaces with your hands.
. Mask off the dashboard before painting the
f l a n g e .
'/)"f.11
: Apply body primer hole.
Before lilling a cartridge, cut a
"V" in the end of the
nozzle (A) as shown.
13 mm 10.51 in.)
1 4 .
15. Park adhesive into the canridge without air pockets
to ensure continuous delivery. Put the cartridge in a
caulking gun, and run a bead of adhesive (A)
around the edge of the quaner glass (B) as shown:
. After applying the adhesive, peelthe separator
off the butvl taoe.
. Apply the adhesive within 30 minutes after
applying the glass primer' lMake slightly thicker
bead at each corner.
(cont'd)
2 m m
(0.08 in.l
-tf
1\
8 m m
10.31 in
13 mm
(0.51 in.l
5 m m
(0.2 in.)
20-35