Acura 2002 RSX Service Manual page 841

Power Steering
Steering Wheel Installation
1. Before installing the steering wheel, make sure the
front wheels are aligned straight ahead, then center
the cable reel (A). Do this by first rotating the cable
reel clockwise until it stops. Then rotate rt
counterclockwise abouttwo and a halfturns. The
arrow mark (B) on the cable reel label point should
point straight up.
2 . P o s i t i o n t h e t w o t a b s ( A ) o f t h e t u r n s r o n a l
c a n c e l l i n g s l e e v e ( B ) a s s h o w n , a n d i n i t a l l t h e
steering wheel on to the steering column shaft,
m a k a n g s u r e t h e s t e e r i n g w h e e l h u b ( C ) e n g a g e s
the pins (D) of the cable reel and tabs of the
canceling sleeve. Do not tap on the steering wheel
or steering column shaft when installinq the
steering wheel,
17-24
\
' i l
3. lnstall the steering wheel bolt (A) and tighten it.
A
39 N.m
t4.0 kgf.m,29 tbf.ftl
4. Connect the cruise control set/resume swttcn
conneclor.
5. Install the driver's airbag, and confirm rhat the
system is operating properly (see page 23_12g).
6 . C h e c k t h e h o r n a n d t u r n s i g n a l c a n c e l l i n g f o r
proper operation.
7. Reconnect the battery and do the following:
. Power window control unit resetting procedure
{ s e e p a g e 2 2 - 1 3 9 ) .
. P C M i d l e l e a r n p r o c e d u r e ( s e e p a g e
1 1 _ 1 4 9 ) .
. Enter the anti-theft code for the
radio, then enter
the costomer's radio station presets.
. Set the clock.
{