Acura 2002 RSX Service Manual page 765

Clutch Clearance lnspection
Special Tool Required
Clutch compressor attachment 07ZAE-PRP0 1 00
1. lnspect the clutch piston, discs, plates, and end
plate for wear and damage (see page 14-231), and
inspect clutch waved-plate phase difference (see
page 14-232), if necessary.
2. Installthe clutch piston in the clutch drum. Do not
install the O-rings during inspection.
lnstall the waved spring (A) in the 1st clutch drum
(B). Starting with the clulch waved-plate,
alternately installthe clutch plate (4) {C) and discs
( 4 ) ( D ) , t h e n i n s t a l l t h e c l u t c h e n d p l a t e ( E ) w i t h t h e
flat side toward the disc.
4. Installthe waved spring (A) in the 2nd clutch drum
(B). Installthe clutch flat-plate (C), then staning
with the clutch disc, alternately installthe clutch
disc (4) (D) and waved-plates {3) (E), then installthe
clutch end plate (F) with the flat side toward the
d i s c .
'@
5
Installthe waved spring (A) in the 3rd clutch drum
(B). Install the clutch flarplate (C). then starting
with the clutch disc, alternately installthe clutch
disc (4) (D) and waved-plates (3) (E), then installthe
clutch end plate (F) with the flat side toward the
d r s c .
\ - r
ffi
W
(cont'd)
14-233