Table of Contents
Advertisement
sRs
DTC Troubleshooting (cont'dl
DTC 5-1, 5-2, 5-4, 5-8, 6-3, 6-4, 6-7,6-8,7-1,
7-2,7-3,8-1,8-2, 8-3, 8-4, 8-5, 8-6, 9-1, 9-2:
lnternal Failure of the SRS Unit
NOTE: Before troubleshooting any ofthese DTCS, check
the battery/system voltage. lf the voltage is low, repair
the charging system or replace the battery before
troubleshooting the SRS. lf the baftery/system voltage
is now OK, ask the customer if the battery ever went
oeao,
1 . Erase the DTC memory (see page 23-23).
2. Turn the ignition switch ON (ll), and check that the
SRS indicator comes on for about 6 seconds and
then goes off.
Does the SRS indicatot stay on?
YES Replace the SRS unit (see page 23-138). !
NO - Intermittent failure, system is OK at this time.
Go to Troubleshooting Intermittent Failures (see
page 23-231'.
23-74
v
DTC 10-1, 10-2,10-3,10-4, 10-5, 10-6. 10-7:
Airbags, Side Airbags and/or Seat Belt and
Seat Belt Buckle Tensioners Deployed
The SRS unit must be replaced after any airbags have
deployed {see page 23-138).f
3
Advertisement
Chapters
Table of Contents
Troubleshooting
