Stereo Sound System
Audio Unit Removal/lnstallation (cont'd)
Wlthout BOSE Sound System
NOTE:
. Put on gloves to protect your hands,
. Take care not to scratch the dashboard and related
pans.
'1.
Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's
preset buttons.
2. Remove the dashboard center lower cover (see
page 20-63).
3. Remove the two mounting bolts, then remove the
center panel.
4. Disconnect the audio unit connector (A). antenna
lead (B) and hazard warning switch connector (C).
then remove the audio unit (D).
Ar
w
5. Remove the four mounting bolts and the audio unit
from the audio bracket.
Installthe audio unit in the reverse order of
removal. and note these items:
. Make sure the audio unit and hazard warning
light switch connectors are plugged in properly,
and the antenna lead is connected properly.
. Enter the anti-theft code for the radio. then enter
the customer's radio station Dresets.
6 .
U
22-106