14
FCoE login groups
7.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
•
Editing an FCoE login group
Complete the following steps to edit the name of a login group. You can manually add ports by
entering the world wide name (WWN) or select available managed CNAs from all discovered hosts.
Only directly-connected devices are supported.
1. Select Configure > FCoE from the menu bar.
2. Select a group from the Login Groups list and click Edit.
382
Click OK.
The FCoE Login Group Confirmation and Status dialog displays.
On closing the FCoE Login Group Confirmation and Status dialog box, the FCoE Configuration
Dialog refreshes the data and the latest information is displayed.
"FCoE login groups"
or
Right-click the DCB device and select FCoE.
The Edit Login Group dialog box, shown in
FIGURE 141
Edit Login Group dialog box
Figure
141, displays.
Brocade Network Advisor SAN User Manual
53-1002167-01