Delta ASDA-B2 Series User Manual page 265

Chapter 7 Parameters
Setting value: 0x11
DO
Name
Warning output (Forward / reverse limit, communication
WARN
error, undervoltage)
Setting value: 0x19
DO
Name
Speed completed output: In speed mode, when the
deviation between the speed feedback and the
SP_OK
command is smaller than the setting value of P1-47,
then this DO is ON.
NOTE
When P2-18 to P2-22 and P2-37 are set to 0, DI has no function.
7-104
Function Description of Digital Output (DO)
Function Description of Digital Output (DO)
ASDA-B2
Trigger Control
Method Mode
Level
All
Triggered
Trigger Control
Method Mode
Level
S, Sz
Triggered
Revision May, 2018