Delta ASDA-B2 Series User Manual page 226

ASDA-B2
P2-33▲ AUT3 Semi-Auto Inertia Adjustment
Operation
Interface:
Default: 0
Control
Mode:
Range: 0 ~ 1
Data Size: 16-bit
Format: Decimal
Settings:
P2-34 SDEV The Condition of Overspeed Warning
Operation
Interface:
Default: 5000
Control
Mode:
Range: 1 ~ 6000
Data Size: 16-bit
Format: Decimal
Settings: The setting of over speed warning in servo drive error display
Revision May, 2018
Panel/Software
ALL
Unit: N/A
 Semi-auto Setting:
1: It means the inertia estimation in semi-auto mode is
completed. The inertia value can be accessed via P1-37.
0: 1. When the display is 0, it means the inertia adjustment is
not completed and is adjusting.
2. When the setting is 0, it means the inertia adjustment is
not completed and is adjusting.
Panel/Software
S
Unit: r/min
(P0-01)
Communication
Semi-auto setting
Reserved
Not in use
Communication
Chapter 7 Parameters
Address: 0242H
0243H
Related Section: N/A
Address: 0244H
0245H
Related Section: 6.2.5
7-65