Delta ASDA-B2 Series User Manual page 170

ASDA-B2
Planning of Digital Input / Output and Output Setting Parameter
Parameter Abbr.
P1-54 PER Position Completed Range
P1-56 OVW
Read-only register, e.g. parameter P0-00, P0-10 and P4-00, etc.
(★)
Setting is invalid when Servo On, e.g. parameter P1-00, P1-46 and P2-33, etc.
(▲)
Not effective until re-power on or off the servo drive, e.g. parameter P1-01 and
()
P3-00.
Volatile parameters, e.g. parameter P2-30 and P3-06
()
Revision May, 2018
Function
Output Overload Warning
Level
Default Unit Control Mode
12800 pulse O
120 % O
.
Chapter 7 Parameters
Related
Section
Table
7.2
Table
O O
7.2
7-9