Delta ASDA-B2 Series User Manual page 253

Chapter 7 Parameters
P4-15
COF1
Operation
Interface:
Default: Factory setting
Control
Mode:
Range: 0 ~ 32767
Data Size: 16-bit
Format: Decimal
Settings: Manually adjust the hardware offset. The adjustment function
P4-16
COF2
Operation
Interface:
Default: Factory setting
Control
Mode:
Range: 0 ~ 32767
Data Size: 16-bit
Format: Decimal
Settings: Manually adjust the hardware offset. The adjustment function
7-92
Current Detector (V1 phase) Offset
Adjustment
Panel / Software
ALL
Unit: N/A
needs to be enabled by the setting of parameter P2-08. It is not
suggested to adjust the auxiliary adjustment. This parameter
cannot be reset.
Current Detector (V2 phase) Offset
Adjustment
Panel / Software
ALL
Unit: N/A
needs to be enabled by the setting of parameter P2-08. It is not
suggested to adjust the auxiliary adjustment. This parameter
cannot be reset.
Communication
Communication
ASDA-B2
Address: 041EH
041FH
Related Section: N/A
Address: 0420H
0421H
Related Section: N/A
Revision May, 2018