Delta ASDA-B2 Series User Manual page 240

ASDA-B2
P2-67 JSL
Operation
Interface:
Default: 1.5
Control
Mode:
Range: 0 ~ 20.0
Data Size: 16-bit
Format: One-digit
Example: 1.5 = 1.5 times
Settings: In semi-auto mode, if the value of inertia estimation is smaller
Revision May, 2018
1: 0x8000. The setting value of P1-46 is the pulse number of
quadrupler frequency per cycle.
If the pulse number that host controller needs to receive is 187
pulse per cycle, then set P1-46 to 187 pulse, the host controller
will receive 187 pulse per cycle.
Para. setting: P1-46=4,P2-66=0x8000
Motor runs a cycle
OA
OB
Stable Inertia Estimating Time
Panel/Software
ALL
Unit: 1 times
than P2-67 and the status remains for a while, the system will
regard the inertia estimation as completed.
Communication
15
0.1 times
0 ~ 200
Decimal
15 = 1.5 times
Chapter 7 Parameters
Address: 0286H
0287H
Related Section: N/A
7-79