Delta ASDA-B2 Series User Manual page 250

ASDA-B2
P4-08★
PKEY
Operation
Interface:
Default: N/A
Control
Mode:
Range: Read only
Data Size: 16-bit
Format: Hexadecimal
Settings: The aim is to check if the five Keys, MODE, UP, DOWN, SHIFT,
P4-09★
MOT
Operation
Interface:
Default: N/A
Control
Mode:
Range: 0 ~ 0x3F
Data Size: 16-bit
Format: Hexadecimal
Settings: There is no difference when reading DO output signal via panel or
Revision May, 2018
The value of writing P4-07 is 0x0011, which means software SDI1
and SDI5 is ON.
Please refer to P2-10 ~ P2-17 and P2-36 for the function program
of digital input pin DI (DI1 ~ DI9).
Input Status of the Drive Keypad
(Read-only)
Panel / Software
ALL
Unit: N/A
and SET can work normally. This parameter is also used to check
if the Keys are all functional when producing servo drives.
Output Status (Read-only)
Panel / Software
ALL
Unit: N/A
the communication.
Communication
Communication
Chapter 7 Parameters
Address: 0410H
0411H
Related Section: N/A
Address: 0412H
0413H
Related Section:
4.4.5
7-89