Delta ASDA-B2 Series User Manual page 206

ASDA-B2
P1-53 RES2 Regenerative Resistor Capacity
Operation
Interface:
Default: See the table below
Control
Mode:
Range: 30 ~ 3000
Data
Size:
Format: Decimal
Settings:
P1-54 PER
Operation
Interface:
Default: 1600
Control
Mode:
Range: 0 ~ 1280000
Data Size: 32-bit
Format: Decimal
Settings: In position mode (PT), if the deviation pulse number is smaller
P1-55 MSPD Maximum Speed Limit
Operation
Interface:
Default: rated speed
Control
Mode:
Range: 0 ~ Max. speed
Data Size: 16-bit
Format: Decimal
Settings: The default of the max. speed of servo motor is set to the rated
Revision May, 2018
Panel/Software Communication
ALL
Unit: Watt
16-bit
Model
750 W models
1 kW to 3 kW models
Position Completed Range
Panel/Software
PT
Unit: pulse
than the setting range (the setting value of parameter P1-54),
DO.TPOS is ON.
Panel/Software
ALL
Unit: r/min
speed.
Default
60 W
60 W
Communication
Communication
Chapter 7 Parameters
Address: 016AH
016BH
Related Section:
6.6.3
Address: 016CH
016DH
Related Section:
Table 7.2
Address: 016EH
016FH
Related Section: N/A
7-45