Delta ASDA-B2 Series User Manual page 257

Chapter 7 Parameters
Table 7.1 Function Description of Digital Input (DI)
Setting value: 0x01
DI Name
When this DI is On, servo is activated (Servo On)
SON
Setting value: 0x02
DI Name
After the alarm has been cleared, when the DI is ON
ARST
the drive will show that the alarm has been cleared.
Setting value: 0x03
DI Name
In speed and position mode, when the DI is ON
(P2-27 should be set to 1), the gain switched to the
GAINUP
one multiplies the switching rate.
Setting value: 0x04
DI Name
Clear the pulse counter and the setting of parameter
CCLR
P2-50.
7-96
Function Description of Digital Input (DI)
Function Description of Digital Input (DI)
Function Description of Digital Input (DI)
Function Description of Digital Input (DI)
ASDA-B2
Trigger Control
Method Mode
Level
All
Triggered
Trigger Control
Method Mode
Rising-edge
All
Triggered
Trigger Control
Method Mode
Level
PT, S
Triggered
Trigger Contro
Method l Mode
Rising-edge
Triggered,
PT
Level
Triggered
Revision May, 2018