Ethernet Link Aggregation Configuration Commands; Default; Description - HP 830 Command Reference Manual

Ethernet link aggregation configuration
commands
Support for this feature depends on the device model. For more information, see About the Command
References for HP Unified Wired-WLAN Products.

default

Use default to restore the default settings for an aggregate interface.
Syntax
default
Views
Layer 2 aggregate interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to restore their default
settings. If your restoration attempt still fails, follow the error message instructions to resolve the problem.
Examples
# Restore the default settings for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description to set a description for an interface. For example, you can include information such as
the purpose of the interface for ease of management.
Use undo description to restore the default.
Syntax
description text
68