Nortel DMS-100 Series Replacement Procedures page 529

22 Return the inactive SMA unit to service by typing
>RTS UNIT unit_no
and pressing the Enter key.
where
unit_no
is the number of the SMA unit tested in step 21
If RTS
passes
fails
At the equipment frame
23 Remove the sign from the active SMA unit.
24 Go to the common returning a card procedure in this document.
Go to step 26.
25 For further assistance, contact the personnel responsible for the next level of
support.
26 You have completed this procedure. Return to the maintenance procedure
that directed you to this card replacement procedure and continue as
directed.
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
in an SMA
Do
step 23
step 25
1-497
NT2X70
(end)