Nortel DMS-100 Series Replacement Procedures page 157

At the MAP display
13 Go to the PM level and post the RMM, if not already posted, and load the
RMM by typing
>PM;POST RMM rmm_no;LOADPM
and pressing the Enter key.
where
rmm_no
is the number of the RMM shelf in which the card is to be replaced
If
message loadfile
found in directory is
received
load passes
load fails
14 Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
15 Locate the tape that contains the PM load files.
At the IOE frame
16 Mount the tape on a magnetic tape drive.
At the MAP display
17 Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
18 List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
wherewhere
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
in an OPM RMM
Do
step 14
not
step 31
step 36
Do
step 15
step 21
step 26
1-125
NT2X06
(continued)