Nortel DMS-100 Series Replacement Procedures page 854

1-822 XPM card replacement procedures
NT6X19
in an RSC-S (DS-1) Model B LCME
11
12
13
14
15
16
297-8021-547 Standard 14.02 May 2001
Return the NT6X19 card to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
Send any faulty cards for repair according to local procedure.
Record the date the card was replaced, the serial number of the card, and the
symptoms that prompted replacement of the card. Go to step 16.
Return to the procedure that directed you to this procedure. If necessary, go
to the point where a faulty card list was produced, identify the next faulty card
on the list, and go to the appropriate card replacement procedure for that card
in this manual.
Obtain further assistance in replacing this card by contacting operating
company maintenance personnel.
You have successfully completed this procedure. Return to the maintenance
procedure that directed you to this card replacement procedure and continue
as directed.
(end)
Do
step 12
step 16