Nortel DMS-100 Series Replacement Procedures page 938

1-906 XPM card replacement procedures
NT6X21
in an RSC-S (PCM-30) Model A LCME
At the LCE frame
5
6
297-8021-547 Standard 14.02 May 2001
WARNING
Card damage—transport
Take these precautions to protect the circuit cards from
electrical and mechanical damage while transporting cards.
When handling a circuit card not in an electrostatic discharge
(ESD) protective container, stand on a conductive floor mat
and wear a wrist strap connected, through a 1-megohm
resistor, to a suitably grounded object, such as a metal
workbench or a DMS switch frame (Northern Telecom
Corporate Standard 5028).
Store and transport circuit cards in an ESD protective
container.
DANGER
Equipment damage
Take these precautions when removing or inserting a card:
1. Do not apply direct pressure to the components.
2. Do not force the cards into the slots.
Put on a wrist strap.
DANGER
Hot materials
Exercise care when handling the line card. The line feed
resistor may be very hot.
(continued)