1-456 XPM card replacement procedures
NT2X70
in an RLCM-EDC HIE
Summary of replacing an NT2X70 card in HIE shelf
At PM level, post
and busy the
LCM unit.
Power down the
NT2X70 card in
the HIE shelf
Replace the card
with one having
identical PEC
Power up the
NT2X70 card in
the HIE shelf
RTS the LCM
unit
End of
procedure
297-8021-547 Standard 14.02 May 2001
(continued)
This flowchart summarizes the
procedure.
Use the instructions in the
procedure that follows this
flowchart, to perform the
procedure.