Nortel DMS-100 Series Replacement Procedures page 159

29 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
30 Reload the RMM by typing
>LOADPM
and pressing the Enter key.
If
load failed
load passed
31 Return the RMM to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
32 Go to the TTP level of the MAP and post the RMM by typing
>TRKS;TTP;POST P RMM rmm_no
and pressing the Enter key.
where
rmm_no
is the number of the RMM shelf in which the card is to be replaced
33 Return to service the circuits busied in step 7 by typing
>RTS ALL
and pressing the Enter key.
If
passed
failed
34 Send any faulty cards for repair according to local procedure.
35 Record the following items in office records:
• date the card was replaced
• serial number of the card
• symptoms that prompted replacement of the card
DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
in an OPM RMM
Do
step 36
step 31
Do
step 32
step 36
Do
step 34
step 36
1-127
NT2X06
(continued)